Shop

KC Combination Condensing Units

One unit for both cooler and freezer boxes, saving space, installation time and shipping cost.

Link/Link+ Multi-Compressor Refrigeration System
Link/Link+
November 22, 2016
KeepRite_Web_Banner AWEF
About AWEF Requirements for Condensing Units
February 18, 2020
Show all

CONTACT A PRODUCT SPECIALIST TODAY:

[email protected]
1-844-893-3222 ext. 524

Overview

  • One unit for both cooler and freezer boxes, saving space, installation time and shipping cost.
  • Copeland scroll or hermetic compressors
  • Oversized condenser surface
  • Oversized receiver
  • Oversized electrical control panel
  • Single point electrical hook up

Units are available with Copeland compressors and include many sought-after standard features, giving you the quality you expect and a long list of options you demand.

Features/Options

Certification:
Features:
Indoor Unit:
  • One unit for both cooler and freezer boxes, saving space, installation time and shipping cost.
  • Oversized condenser surface
  • Oversized receiver
  • Oversized electrical control panel
  • Single point electrical hook up
  • Fan guard protection
  • Compatible with Low GWP Refrigerants
  • Weatherproof electrical control box with compressor contactor and fused control circuit
  • High efficiency enhanced tube and fin condenser design
  • Energy efficient PSC condenser fan motor
  • Receiver with fusible plug and liquid shut off valve
  • Suction service valve
  • Pre-formed copper tubing
  • Liquid injection (low temp. models) for scroll compressors
  • Unit leak tested and shipped with helium holding charge
  • Fixed high pressure switch and adjustable low pressure control
  • Receiver inlet valve on 2-fan units models only
  • Discharge thermostat on applicable models only
  • Painted cabinet
Outdoor Unit: All Standard Features of Indoor Unit, Plus:
  • Painted weather-resistant housing with removable hood
  • Flooded head pressure control (non adjustable) 150 PSIG for optimal efficiency for scroll compressors
  • Crankcase heater and headmaster valves
  • Fan cycling control with flex hose (2 fan units)
On Medium Temp. Circuit:
  • Sealed Liquid Line Filter Drier & Sight Glass
On Low Temp. Circuit:
  • Sealed liquid line filter drier and sight glass
  • Electric Defrost Kit
Available Options:
  • Discharge line check valve
  • Receiver inlet ball valve
  • Heated and Insulated receiver
  • Over-sized receiver
  • Sealed liquid line filter drier & sight-glass
  • Ball valve – liquid line (shipped loose)
  • Insulated suction lines
  • Leg kits
  • Discharge air hood
  • Liquid line solenoid valve (with standard 230 volt coil) – shipped loose
  • Variable speed EC motors only as head pressure control
  • Dual pressure control with flex hoses
  • Compressor circuit breaker
  • Current sensing relay – for use with oil safety control (where applicable)
  • Defrost heater contactor c/w fuse block
  • Evaporator fan contactor c/w fuse block
  • Disconnect switch
  • Disconnect fusing
  • Pump down toggle switch
  • Lock out control circuit relay
  • Hoffmann speed control for condenser fan (replaces flooded valve)
  • Time delay relay for compressor
  • Mechanical time clock
  • Electronic defrost kit
  • Electronic voltage / Phase monitor
  • SmartSpeed Fan Motor Technology

Specifications

Application:
  • High, Medium and Low Temperature Refrigeration applications.
  • Indoor or Outdoor
Capacity:
  • 1/2 to 22 HP for High, Medium, and Low Temperature Refrigeration applications.
Electrical:
  • 208-230/1/60
  • 208-230/3/60

Available Features and Technology

SmartSpeed