KEH – Indoor/Outdoor Air Cooled Hermetic Condensing Units
June 29, 2016KTL – Two-Way Low Profile Evaporators
July 21, 2016CONTACT A PRODUCT SPECIALIST TODAY:
See our Product Data and Specifications for full details (PDF)
We offer a complete line up of “Generation D” condensing units that meet or exceed the new “AWEF” requirements for condensing units. Use this guide which collects all of the AWEF numbers for compliant equipment: https://docs.k-rp.com/awef/kr_awef_quick_reference.pdf
Have questions about AWEF, WICF, etc.? Visit our AWEF-FAQ
Certification:
Most models meet or exceed the new “AWEF” requirements for condensing units. Use this guide which collects all of the AWEF numbers for compliant equipment: https://docs.k-rp.com/awef/kr_awef_quick_reference.pdf
Features:
Indoor Unit:
- Compatible with Low GWP Refrigerants
- Weatherproof electrical control box with compressor contactor and fused control circuit
- Copeland scroll compressor
- High efficiency enhanced tube and fin condenser design
- SmartSpeed EC Fan Motor Technology standard on models using chassis 1 (See our Product Data and Specifications for full details (PDF))
- Energy efficient PSC condenser fan motor on models using chassis 2 thru 6 (See our Product Data and Specifications for full details (PDF))
- Receiver with fusible plug and liquid shut off valve
- Suction service valve
- Pre-formed copper tubing
- Liquid injection (low temp. models)
- Unit leak tested and shipped with helium holding charge
- Fixed high pressure switch and adjustable low pressure control
- Receiver inlet valve on 2-fan units models only
- Discharge thermostat on applicable models only
- Painted cabinet
- Anti-short cycle time delay relay
Outdoor Unit: All Standard Features of Indoor Unit, Plus:
- Painted weather-resistant housing with removable hood
- Flooded head pressure control (non adjustable) 150 PSIG for optimal efficiency
- Crankcase heater
- Fan cycling control with flex hose (2 fan units)
Available Options:
- Suction accumulator with and without boil-out coil
- Discharge line check valve
- Oil separator with and without oil return filter and solenoid valve
- Adjustable flooded head pressure control valves
- Receiver inlet ball valve
- Heated and Insulated receiver
- Over-sized receiver
- Sealed liquid line filter drier & sight-glass
- Ball valve – liquid line (shipped loose)
- Insulated suction lines
- Leg kits
- Discharge air hood
- Sub cooling circuit on 5 – 17 HP models
- Liquid line solenoid valve (with standard 230 volt coil) – shipped loose
- Variable speed EC motors only as head pressure control
(See Bulletin K40-HPC-AG for details) - QuickVac Evacuation and Refrigerant Recovery Valves
- Dual pressure control with flex hoses
- Compressor circuit breaker
- Current sensing relay – for use with oil safety control (where applicable)
- Defrost heater contactor c/w fuse block
- Evaporator fan contactor c/w fuse block
- Disconnect switch
- Disconnect fusing
- Pump down toggle switch
- Lock out control circuit relay
- Hoffmann speed control for condenser fan (replaces flooded valve)
- Time delay relay for compressor
- Mechanical time clock
- Electronic voltage / Phase monitor
- SmartSpeed Fan Motor Technology on models using chassis 2-6 (See our Product Data and Specifications for full details (PDF))
- Limitrol+ Floating Head Pressure Control System (See Bulletin K40-LIMITROL-AG for details)
Application:
- High, Medium and Low Temperature Refrigeration applications.
- Indoor or Outdoor
Capacity:
- 3/4 to 17 HP for High, Medium and Low Temperature Refrigeration applications.
Electrical:
- 208-230/3/60
- 460/3/60
- 208-230/1/60
- 575/3/60
- 220/1/50
- 200-220/3/50
- 380-400/3/50
Product Manuals & Specifications:
Product Data and Specifications – Generation D Models (for AWEF-Compliant Applications)
Product Data and Specifications – Generation C Models (for AWEF-Exempt Applications)
Product Data and Specifications – Discontinued Generation C High Temp. Units
Installation Manual
Limitrol+ Application Guide
Head Pressure Control Application Guide
Lead Lag Control Panel
Related Sales Material:
All-Product Brochure
Limitrol+ Floating Head Pressure Control System Sell Sheet
SmartSpeed Fan Motor Technology Sell Sheet
Shafted EC Motors Sell Sheet
Pricing:
KeepRite Condensing Units Price Book
Additional Links:
About Heated And Insulated Receivers
Shafted EC Motors
About Limitrol+
Download AutoCAD Drawings – Generation “D” Units
Download AutoCAD Drawings – “C” Generation Units
Download High-Resolution Image
AWEF-FAQ
AWEF numbers for KeepRite Refrigeration AWEF-compliant condensing units
Cross-reference: Generation D (AWEF compliant) to C-Generation (AWEF non-compliant) equipment
Cross-reference: Generation D (AWEF compliant) scroll to C-Generation (AWEF non-compliant) hermetic or semi-hermetic equipment
Product Data and Specifications – Generation C Models (units produced pre-2020)
Service Parts:
Search for KEZ Parts In The Service Parts Database
Email Our Service Parts Specialists
Product Specialist:
[email protected]
1-844-893-3222 ext. 521